Professor Peiquan Guo from School of Mechanical Engineering



l  Guo Peiquan  (PhD)

 

Professor

School of Mechanical Engineering

University of Jinan

 

l  Education

PHD: Mechanical Manufacturing and Automation, Shandong University

MES: Mechanical Manufacturing and Automation, Shandong University

 

l  Research  Interests

Advanced Manufacturing Technology

CAD/CAM/CAE

Machine Design Theory

 

l  Teaching Interests

Advanced Manufacturing Technology

CAD/CAM/CAE

 

l  Research Publications and Grants

Publicaiton Articles

1. Guo Peiquan, Zhao Ping, Shi Jinping, He Ming .Isometric Profile and Arc-trilateral-shaped Connection between Shaft and Hub. Proceedings of the 6th International Conference on Frontiers of Design and Manufacturing: Xií»an: Science Press, Science Press USA Inc. 2004.6: 138-140

2. P.Q. Guo, C.Z. Huang and P. Zhao. Cutting Force Model for Contour Surface Machining of Gear Indexing Cam with Flat End Milling. Materials Science Forum,2004,471-472:122-126

3. P.Q.Guo, P. Zhao, J.P. Shi and X.X. Li. Inequi-diameter Milling of Gear Indexing Cams and Their Computer Aided Programming. Proceedings of the 3rd International Conference on Responsive Manufacturing: Guangzhou: Guangdong Peopleí»s Publishing House. 2005.9: 112-117

4.P.Q. Guo, C.Z. Huang, J.P. Shi and X.X. Li. Modeling of Virtual Machining System for Contour Milling of Gear Indexing Cam. Materials Science Forum,2006,532-533:793-796

5.N. Fan, P.Q. Guo, X. Chi and Z.H. Gao. Frequency Spectrum Analysis on Cutting Forces in Cutting Process. Applied Mechanics and Materials, 2008, 10-12: 707- 710         http://www.scientific.net

6.P.Q. Guo, C.Z. Huang, W. Wang and N. Fan. Inequi-diameter Milling of Gear Indexing Cam and Computer Aided NC Programming. Applied Mechanics and Materials, 2008, 10-12: 657- 661

7.Wang Shouren., Guo Peiquan, Yang Liying.Centrifugal precision cast TiAl turbocharger wheel using ceramic mold. Journal of Materials Processing Technology, 2008, (204): 492-497

8. P.Q. Guo, S. R. Wang, J.P. Shi, et al. Research on Dynamic Performance of Milling System For Parallel Indexing Cam Contour Milling. Key Engineering Materials, 2009, 392-394:156-160

9. Shou-ren WANG, Pei-quan GUO, Hong-yan WANG, WANG Min. An Abrasive Wear Model of Interpenetrating Composites [J]. Materials Science Forum, 2008, 575-578: 1329-1334

10. P.Q. Guo, J.P. Shi, D.N. Su, et al. Research on Dynamic Performance of Milling System For Disc Cam Contour Milling. Proceedings of CJCM2008, Beijing: Chemical Industry Press, 2008.12: 43-45

11. K. Lu, P.Q. Guo, J.P. Shi. Numerical Simulation of Swirling Cavition Device for Wastwater Treatment. Proceedings of CJCM2008, Beijing: Chemical Industry Press, 2008.12: 46-49

12. Shouren Wang, Peiquan Guo, Liying Yang, Fang Zhao, Yanjun Wang, Microstructure and mechanical properties of (Al,Cr)3Ti based alloy with different Al additions [J]. Materials and Design, 2009, 30: 704-709

13. Shou-Ren Wang, Pei-Quan Guo, Li-Ying Yang, and Yanjun Wang. Microstructure and Mechanical Properties of AZ91 Alloys by Addition of Yttrium [J]. Journal of Materials Engineering and Performance, 2009, 18(2): 137-144

14.SHI Jinping, LU Kai, GUO Peiquan. Wastewater treatment device based on swirling cavitation degradation [J]. Journal of Harbin Institute of Techonology. 2010, 17(S1):6-9

15.ZHAO Haodong, LI Taoyuan, GUO Peiquan. Disc cam in indexing mechanism with continuous acceleration behavior and computer aided NC programming [J]. Journal of Harbin Institute of Techonology. 2010, 17(S1):10-12

16.QIN Xue, LI Taoyuan, GUO Peiquan. Development of CAD system of oil-combustor based on Pro/E [J]. Journal of Harbin Institute of Techonology. 2010, 17(S1):13-14

17.Peiquan Guo, Shouren Wang and Huanyong Cui. Microstructure and propertities of TiAlN/AlN composite film deposited on camí»s profile by ion beam sputtering technique [J]. Key Engineering Materials. 2010, 443:456-468

18. Haodong Zhao, Yanke Cao, Peiquan Guo.Dynamics Simulation of Parallel Indexing Cam Mechanism Based on Rigid-flexible Coupled Modelling [J]. Advanced Materials Research. 2011, 156-157: 172-176

19. Haodong Zhaoa, Yanke Caob and Peiquan Guo. Simulation Analysis on Transmission Function of Parallel Indexing Cam Mechanism Based on Adams [J]. Applied Mechanics and Materials. 2011, 44-47:1258-1262

20. Yanke Cao , Taoyuan Li , Peiquan Guo. Error Prediction of Parallel Indexing Cam Contour Finish Milling [C]. Proceedings of 2010 International Conference on Digital Enterprise And Digital Manufacturing. IEEE(ISBN:978-4244-9667-9) 2010:195-198

21.Yan Ke Cao, Pei Quan Guo, Hao Dong Zhao. Research on the Construction Method of Intermittent Transmission Function and its Application[J]. Advanced Materials Research. 2011, 199-200: 298-302

22. H.D. Zhao, P.Q. Guo ,Y.K. Cao, X.W. Wang and P. Zhang. Research on Dynamic Behavior of Disc Indexing Cam Mechanism Based on Virtual Prototype Technology [J]. Key Engineering Materials. 2012, 499: 277-282

23. X. W. Wang, P. Q. Guo, H. D. Zhao and Y. K. Cao. Review of Quick-point Grinding Technology [J]. Key Engineering Materials. 2012, 499: 295-300

24. J. P. Shi, P. Q. Guo and H. D. Zhao. The Application of Swirling Cavitation in Wastewater Treatment Device [J]. Key Engineering Materials. 2012, 499: 330-335

25. Xiaowei Wang, Peiquan Guo, Lianyi Zhao and Pu Zhang. Load Distribution Balance Principle of Petroleum Buttress Casing Thread and Its NC Machining Method [J]. Materials Science Forum. 2012, 723: 439-444

 

 

Contact: oss_guopq@ujn.edu.cn